dSPACE DS1103 Control Workstation Tutorial and DC Motor Speed Control 2008-2009 Senior Project |
Home |
Annemarie Thomas, Electrical Engineering Bradley University |
Home | Media | Deliverables | Timeline | Contact |
Introduction
The dSPACE
DS1102 was first used at
Project
The goals for the dSPACE DS1103 Control Workstation Tutorial and DC Motor Speed Control project are the following:
Determine and implement any additional setup that may be required for the dSPACE DS1103 control workstation.
Write a tutorial for use of the workstation, paying particular attention to details related to the DS1103 board using a DC motor speed controller as the example application.
Design a controller to control the speed of a DC motor.
Implement the designed DC motor speed controller on the dSPACE DS1103 system using the Simulink and the dSPACE blocksets, the Matlab-to-DSP interface libraries, Real-Time Interface to Simulink, and Real-Time Workshop.
The ultimate
goal of this project is to decrease the learning curve for future students
who use the workstation for more complex projects.
Past projects completed by
Final Report dSPACE DS1103 Control Workstation Tutorial