Deliverables

The following constitute the deliverables for the Real-Time Electrocardiogram Monitoring project. These are not yet final and will be updated at least once before 2017-05-10.

Source Code

• Git repository archive: .zip
  

  The Git repository contains all code for the Raspberry Pi software, DSP software, arrhythmia detection algorithm, and printed circuit board design.

• Raspberry Pi3 SD card image: .bin.gz
  

  This image can be applied to a 16GB MicroSD card using gunzip -c ./image_name.bin.gz | dd of=/dev/mmcblk0, where /dev/mmcblk0 is the device corresponding to a computer's build-in SD card slot.

• TI Code Composer Studio 6 workspace archive: .zip

Printed Circuit Board

• CadSoft EAGLE schematic, board, and libraries: .zip
• Schematic: .pdf
• Board layout: .pdf

Documentation

• Code Composer Studio and DSP documentation: .pdf
• Raspberry Pi documentation: .pdf

Final Report and Presentations

• Final report: .pdf
• Final presentation slideshow: .pdf
• Poster: .pdf

Project Proposal

• Project proposal: .pdf
• Project proposal presentation: .pdf